Launch CRP129 Evo (C-reader Professional)
Launch CRP129 Evo (C-reader Professional) additional 1Launch CRP129 Evo (C-reader Professional) additional 2Launch CRP129 Evo (C-reader Professional) additional 3Launch CRP129 Evo (C-reader Professional) additional 4Launch CRP129 Evo (C-reader Professional) additional 5Launch CRP129 Evo (C-reader Professional) additional 6Launch CRP129 Evo (C-reader Professional) additional 7Launch CRP129 Evo (C-reader Professional) additional 8

£329.00 ex VAT £394.80 inc VAT

in_stock
Checkout

Item has been added to your bag

In Stock
  • Official UK Supplier
    100% Genuine Products
  • Next Day Delivery
    On Orders Placed Before 11am
  • Exclusive 2 Year Warranty
    On Diagnostic Tools
  • Activate Your Two Year Warranty
Description

The Launch Creader CRP129 Evo professional diagnostics tool, is a cost-effective and powerful machine. It supports all 10 modes of OBDII

New features at a glance: Based on CRP129, the CRP129 EVO features a larger 5” touch screen, two more reset services , Auto-VIN technology and Automatic Inspection Report for quicker and more precise diagnostic work.

SYSTEMS COVERED: The EVO diagnostic scanner supports Engine, Transmission, ABS and SRS diagnosis,  reading/clearing diagnostic trouble codes and displaying the live data stream, .

SERVICE FUNCTIONS The CRP 129 EVO features 7 SPECIAL FUNCTIONS including oil reset, EPB/SAS/TPMS/DPF service, Throttle Adaptation, and injector programming.

FULLY OBD2 COMPLIANT: The CRP 129 EVO automotive scanner supports all modes of OBDII functions as I/M Readiness Status, Live Data Stream, MIL turn-off, etc., works on most vehicles after 1996.

 

FEATURES

The LAUNCH CRP129 EVO is an upgraded version of classic scanner CRP129, and has the addition of:

  • A larger 5” 720p IPS Touch Screen
  • Three additional special functions
  • Wi-Fi enabled
  • On- line software updates
  • Wi-Fi printing enabled
  • Diagnostic feedback function
  • Data recording and replay
  • Supports automatic VIN recognition
  • Built in 4000mAh Li- battery
  • Protective carry bag

Four primary System Diagnostic tests

Engine System. All fault codes and data related to the engine electronic controls

Transmission. All fault codes and data for fully automatic transmissions, semi-automatics including direct shift (DSG/DCT) and automated manual gearboxes

ABS System: All fault codes and data related to the antilock braking system components

SRS System:  All faults and data related to the safety restraint systems.

 

CRP 129 EVO Special service functions

  • Oil lamp/service reset
  • Steering angle sensor reset
  • Electric parking brake reset
  • Throttle matching
  • Battery management system reset
  • Diesel particulate filter reset
  • Injector programming

 

Supports AutoVIN Technology

The CRP129 EVO comes with support for Auto-VIN technology which means  it will automatically read and store your vehicle’s VIN number, in one touch. It immediately identifies your car, and you don’t have to enter the year, make, engine, etc. of your car.

This will allow you to:

Automatically identify the vehicle and perform a quick scan, to easily read and retrieve diagnostic trouble codes related.

Quickly match the right software that will enhance the diagnostic capabilities and resolve compatibility issues. AutoVIN retrieval plays an important role when choosing the correct firmware when performing an update.

 

Automatic Inspection Report Uploaded for Convenience

If you don’t understand a particular problem, the LAUNCH CRP129 EVO allows you to save the Inspection Report and transfer the report to the Cloud Server, or even print the data via the PC.

The Inspection Report includes two parts:

Vehicle Information - Year, Make, Model, VIN, Engine Size, Odometer, Vehicle Software Version, Diagnostic Application Version, Diagnostic Path)

Inspection Result

 

All Modes of OBDII Functions for Repair Work

The Launch CRP129 EVO supports all 10 test modes for OBD-II cars . The table below describes the purpose of each mode of operation:

01 - Request Current Powertrain Diagnostic Data

02 - Request Powertrain Freeze Frame Data

03 - Request Emission-Related Diagnostic Trouble Codes

04 - Clear/Reset Emission-Related Diagnostic Information

05 - Request Oxygen Sensor Monitoring Test Results

06 - Request On-Board Monitoring Test Results for Specific Monitored Systems

07 - Request Emission-Related Diagnostic Trouble Codes Detected During Current or Last Completed Driving Cycle

08 - Request Control of On-Board System Test or Component

09 - Request Vehicle Information

10 - Request Emission-Related Diagnostic Trouble Codes with Permanent Status

 

Wide Coverage of Global Mainstream Vehicle Models

LAUNCH CRP129 EVO has wide compatibility with  OBD2 enabled motor vehicles. The scanner works with virtually all cars made from 1996 and newer, if the car has a 16-pin OBD-II port:

Asia:

Acura, Daewoo, Honda, Hyundai, Kia, Infiniti, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota, ISUZU

Europe:

Abarth  Alfa Romeo ,Audi, BMW, Bugatti, Chrysler, Fiat , Euro Ford , Lancia, Mercedes, Mini ,  Smart, VW, , Volvo, Opel, Land Rover, SAAB, Seat, Peugeot, Porsche, Renault,  Citroen, Skoda, Porsche, Sprinter, Jaguar, Jeep, Vauxhall, Volvo

USA:

Ford, Buick, Cadillac, Chevrolet, Chrysler, Dodge, GM, Lincoln.

In addition, the EVO supports CAN bus system and can retrieve both the generic and manufacturer specific codes.

 

Multilingual Data Support System.

The EVO supports the following languages:-

English, Spanish, French, German, Italian, Russian, Portuguese, Japanese, Korean,

 

Technical specifications:

  • Android 7 operating system
  • 5-inch IPS touchscreen
  • 4000MAh Lithium battery
  • 8Gb Micro SD card supports up to 32Gb
  • Touch & keypad inputs
  • Cabled OBD11 connection
  • Charging through 5V cable or diagnostic connection
  • Dimensions: 228mm X 125mm X 34.5mm
  • Weight: 570 grams

 

 

 

Code:

For a comparison of all of our diagnostic tools and to see which one is right for you, please click here.

Delivery Rates

Mainland UK addresses

Service Price
Large orders will be sent via TNT Express £15.00
Small orders will be sent via 1st Class Royal Mail Recorded £5.00

Off-mainland UK addresses (including Islands and Scottish Highlands)

Service Price
Large orders will be sent via TNT Express £20.00
Small orders will be sent via 1st Class Royal Mail Recorded £5.00

European Delivery Rates

Zones 1 & 2*

Service Price
TNT Express £19.26

*Belgium, Ireland, Luxembourg, Netherlands, France, Germany, Monaco

Zones 3 & 4**

Service Price
TNT Express £19.99

**Andorra, Austria, Denmark, Finland, Greece, Italy, Portugal, Spain, Sweden, Bulgaria, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, Slovenia 

How quickly will my order arrive?

All orders received before 11am will be dispatched same day using a next day delivery service. Orders received after 11am will be dispatched the following working day (Mon – Fri).

How can I track the status of my order?

We will keep you updated with the status of your order via email. Once the order has been dispatched you may track the parcel using the tracking code provided in the ‘confirmation of shipping’ email. If you have any questions regarding your order please email us on enquiries@launchtech.co.uk or phone 01752 344989.

Returns

GUARANTEE

If you are unsatisfied in any way at all, please return the unwanted item within 14 days of delivery date for a full refund or exchange. The item must be unused and retain its original labels & packaging. Sale items are not returnable or refundable.

RETURNS & EXCHANGES

If you think you need to return your item, the first step is to contact us by email (enquiries@launchtech.co.uk) or telephone (01752 344989). Please include a copy of the invoice and state the reason for returning the item and whether you would prefer an exchange or a refund.

Please note all refunds and exchanges are subject to the following terms and conditions.

For more information, please view our full returns policy.