VAG manual tyre pressure sensor configuration TPMS system

2005 onwards

Important, please ensure the vehicle has a good battery charge, leaving the ignition switched ON for extended periods can result in the vehicle battery becoming discharged. Auxiliary battey power or a charger may be required during this process.

1. With the vehicle stationary, switch the ignition to the ON position for 20 minutes.
2. After 20 minutes the tyre pressure sensor control module will enter into configuration mode.
3. Switch the ignition to the "OFF" position
4. Start and drive the vehicle for at least 5-10 minutes with a minimum speed of 20mph.
5. The Tyre pressure monitoring system will then recognise the new sensor signals, and the warning light in the instrument cluster will now hopefully be out.